NXG Technology NX-RM505 - Manual (Page 15)

4. Programming the NX-RM505 to Control
Your Components
first three-digit code number you selected for your device. There is
no way of knowing which code is the one that will have the func-
tions that more closely match your device than the others, so it is
wise to try them all. See step #9 below. (Please enter the code
number within 20 seconds of beginning programming, otherwise
the remote will revert to the SETUP menu and then after a period of
time, it will go back to the MAIN device page.)
If there is more than one code number assigned to your brand, try
one code number at a time until you find the right code number
(the number that turns off your device.)
If the device turns off when you enter the three-digit code, make
note of the code. It will have at least some of the functions in it that
are needed to control your device.
8 Confirm that it is the right code by pressing the Power button.
The device should turn on. After you have confirmed that the right
code is entered, save the code by pressing the SAVE button on
the LCD.
9 At this point try ALL of the buttons on the remote and see which
ones work with your device. The majority of the buttons should work
with your device. Make note of the code if it seems to be the right
one and try the next one. You are trying to find the one that has the
most functions to operate your equipment. If there are any functions
missing, you will learn them from your original remote in the
‘Learning Method’ section on page 19.
10 Continue to program other components by repeating from Step 1
above.
11 You can press EXIT at any time if you do not wish to proceed.
NX-RM505
15
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 15