NXG Technology NX-RM505 - Manual (Page 20)

1. Programming The Function Buttons
1 Go to the SETUP mode by pressing both the MAIN an ENT buttons
simultaneously for three seconds.
2 Press the LEARN button next to the LCD screen.
3 Select the DEVICE that contains the function button you wish to
program.
4 Press the PAGE button to go to page 2 of the device if you need to.
5 Place your original remote control head to head with the NX-RM505
about 2 inches apart on a flat surface as illustrated below.
NX-RM505
20
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 20