NXG Technology NX-RM505 User Manual
Page 32
7. Programming Punch Through Functions
You can use the audio receiver volume control in a different mode
(for example, Audio receiver Volume up and Volume Down and
Mute in Satellite mode) using the volume punch through feature.
You can also have channel punch through (Channel Up, Channel
Down) as well as eight VCR (or DVD) transport buttons (Play,
Stop, FAST FORWARD and Rewind, Skip-, Skip+, Pause, Record)
operate in another mode such as in Satellite, Cable and Audio
modes.
1
Go to the SETUP mode by pressing the MAIN and ENTER buttons
simultaneously for three seconds.
2
Press the PUNCH button next to the LCD screen.
3
Press the VOL button on the LCD for Volume Punch Through, the
PLAY button for Transport Punch Through and the CH button for
Channel Punch Through.
4
Select the device you wish to punch through to (1st device
example - Television or Cable box.)
5
Select the device you wish to punch through from (2nd device
example - Audio receiver.)
You are punching through the controls of the second device to the
device that is currently being controlled by any other buttons.
NX-RM505
32
NX-RM505_Remote_Manual 10/6/08 6:17 PM Page 32