AVTECH Room Alert 32W Monitor (RA32W-WS1-RAS) - Manual (Page 26)

 AVTECH Software Inc.
Configuration & Setup Screens Room Alert 32W
Analog Sensors (0-V)
The Analog Sensor Inputs are designed to interface with sensors that output a DC voltage from 0-5V that
is proportional to the current sensor reading. There are third-party sensors available to monitor extreme
lows or extreme highs for temperature, air flow volume, fluid flow rate, air or fluid pressure, weight,
complex gases and more.
Analog Sensor Inputs are configured on the ‘Sensors’ tab of the ‘Settings’ page. The sensor label can be
modified for each Analog Sensor Input, and High/Low thresholds can be set to trigger alert notifications.
Relay Outputs
Room Alert 32W has two built in relay outputs that can optionally be turned on or off in response to an
alarm condition. Each Relay Output is configured on the ‘Relay Options’ tab of the ‘Settings’ screen. A
unique sensor label can be configured for each relay, which could help to indicate what type of device
the relay is connected to. Each Relay Output can also be individually configured to turn a device on or
off in response to alarms being triggered and alarms being cleared.