AVTECH Room Alert 32W Monitor (RA32W-WS1-RAS) - Manual (Page 28)

3 AVTECH Software Inc.
External Sensor Options Room Alert 32W
External Sensor Options
Digital Temperature Sensor (TMP-SDT-SEN)
The AVTECH Digital Temperature Sensor provides a real-time digital temperature
reading at the location of the temperature probe. The temperature range is from
-67° to 257° Fahrenheit and/or -55% to 125° Celsius. Accuracy is within +/- 0.5
degrees. This is an instant ‘plug & play’ sensor that connects to one of the external
environment sensor channels via an RJ-11 port.
Digital Outdoor Temperature Sensor (TMP-DOT-SEN)
The AVTECH Digital Outdoor Temperature Sensor allows real-time temperature
values from -67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius.
Accuracy is within + / - 0.5 degrees. The external silicon coating makes the Digital
Outdoor Temperature Sensor resilient enough for temperature monitoring outdoors or
in other harsh environments. This is an instant ‘plug & play’ sensor that connects to one
of the external environment sensor channels via an RJ-11 port.
Digital Fluid Temperature Sensor (TMP-DFT-SEN)
The AVTECH Digital Fluid Temperature Sensor allows real-time temperature values
from -67 to 257 degrees Fahrenheit and/or -55 to 125 degrees Celsius. Accuracy
is within + / - 0.5 degrees. Its non-conductive casing makes it a perfect sensor for
monitoring the temperature of fl uids in extreme environments, walk-in coolers, lab
refrigerators or freezers. This is an instant ‘plug & play’ sensor that connects to one of
the external environment sensor channels via an RJ-11 port.
Digital Temperature & Humidity Sensor
(RMA-DTH-SEN)
The AVTECH Digital Temperature & Humidity Sensor provides a real-time digital
temperature and digital humidity reading at the location of the sensor probe. The
temperature range is from -67° to 257° Fahrenheit and/or -55° to 125° Celsius. Accuracy
is within +/- 0.5 degrees. The humidity range is from 0% to 100% percent Relative
Humidity (%RH) with an accuracy within +/- 3.5%. This sensor will also provide the
Heat Index or “Feels Like” temperature. This is an instant ‘plug & play’ sensor that
connects to one of the external environment sensor channels via an RJ-11 port.
Power Sensor (RMA-PS1-SEN)
The AVTECH Power Sensor allows a real-time notifi cation of main or UPS power
status change (i.e. power going on or off). This is an instant ‘plug & play’ sensor that
connects to one of the switch sensor contact sets via a low voltage 2-wire cable.