MoTeC M1 Tune User Manual - Manual (Page 13)

User Manual
STARTING M1 TUNE
Printed documents are not controlled Page 12
5 STARTING M1 TUNE
Important: If, during start-up, you are prompted to allow the M1 software to make changes to
your PC, always allow; otherwise PC communications will not work.
When the software is started, the Quick Launch window will fly out from the left hand side.
From Quick Launch you can connect to an ECU, or open a Package offline. The Quick Launch
images below provide examples “with” and “without” ECUs available for connection.
This example indicates that there are available
online ECUs for connection, as well as a
number of recent Packages that are available
to be opened offline.
This example indicates that there are no ECUs
that M1 Tune is able to connect to, but there
are a number of recent Package that are
available to be opened offline.
Other options available from Quick Launch provide the ability to retrieve logged data (an M1
ECU needs to be connected for this option to work), browse available ECUs, browse offline
Packages, or help on M1 Tune.