4 marking sites as tuned, 5 unmarking sites as tuned – MoTeC M1 Tune User Manual User Manual
Page 36
Advertising
User Manual
WORKSHEET COMPONENTS
Printed documents are not controlled
Page 35
10.4
Marking Sites as Tuned
It is possible to mark a site or range as 'Tuned'. As the value is considered tuned, any interpolate
function will not modify these values.
1. Select the table values.
2. Press
Backspace
.
►
The sites are marked with a red square and the values are considered to be tuned.
See
Unmarking Sites as Tuned
.
10.5
Unmarking Sites as Tuned
To unmark sites as tuned:
1. Select the site(s).
2. Press
Delete
.
►
The sites are unmarked and the red square is removed. The value(s) are considered to be
untuned.
Advertising