8 w and l fuel tuning – MoTeC M1 Tune User Manual User Manual
Page 54
User Manual
USING M1 TUNE
Printed documents are not controlled
Page 53
5. When a site (data) is found that needs to be re-tuned with quick lambda, press the
Q
key.
►
M1 Tune displays a summary window of the action about to be performed. For example:
6. Select
OK
to run the Quick Lambda function.
7. Press
T
to restart display of live data.
11.8
W AND L FUEL TUNING
When performing fuel tuning, the
Q
function adjusts the closest site to the current values. There
is another option that performs a similar function, "
W
".
When "
W
" is used while connected live on an engine, M1 Tune:
1. Selects the site closest to the current engine running site.
2. Performs a quick lambda against this site using the current lambda reading and the lambda
aim value for that site.
3. Tune then performs the same quick lambda function against the next site in the table in the
direction of more engine speed and more efficiency (plus the diagonal site) using the current
lambda reading, and aim values for those sites.
This same function works using recorded data.