MoTeC SDL - Manual (Page 17)

MoTeC Overview 15
SDL Sport Dash Manager
MoTeC Sport Dash Manager is used for configuration, testing, retrieving the
logged data and for general management of the SDL.
An overview of Sport Dash Manager is included later in this manual.
Sport Dash Manager communicates with the SDL via a USB cable. See
Appendix J: USB Wiring for wiring details.
Interpreter
Interpreter is used to analyse the logged data, this is covered in a separate
manual.
BR2Config
This program is used to configure the BR2 beacon receiver via a CAN
connection. BR2 configuration is covered in the BR2 Manual.
Updateable Firmware
The SDL control software (firmware) is field updatable so that new software
features can be used as they become available.