MoTeC SDL - Manual (Page 6)

4 Overview
The Centre Numeric display is incorporated to show the current gear but may
be used for other purposes.
Bottom Display
The 13 digit alpha numeric display can display up to 10 lines of information
that can be scrolled up or down using the external buttons. Each of the 10
lines can display up to 3 channel values at a time.
Additionally the bottom display can show an override value, similar to the
numeric displays.
The bottom display will also show any active alarm messages, which will
override all other values until the alarm is cleared.
Display Formatting
Units
The display units can be changed to suit the driver, for example the driver
may prefer to see the engine temperature in Fahrenheit rather Celsius. This is
independent of the units used for other purposes.
Decimal Places
The number of decimal places can be reduced for display purposes, for
example the engine temperature is measured to 0.1
°C but is better displayed
with no decimal places. This is normally done automatically.