MoTeC SDL - Manual (Page 36)

34 Sport Dash Manager Software
RPM for 2 seconds. Note that a second alarm could be defined which would
cover the range from 500 to 1500 RPM, and which might read as: Engine Oil
Pressure < 50 kPa for 1 second AND Engine RPM > 500 RPM for 5 seconds.
The following shows an example of an Engine Oil Pressure alarm condition.
Checking Operation
Monitor Channels
The currently active channels can be monitored to allow checking of the
operation of all functions and measurements.
To monitor the active channels select Online | Monitor Channels from the
main menu.
Oscilloscope Screen
Any channel may also be shown on an oscilloscope style screen by pressing
the Utilities | Oscilloscope button on the Monitor Channels screen.
Tests
A number of tests are provided to check the operation of the SDL, such as the
Analogue Input and Auxiliary Output Tests. The Auxiliary Output test is very
useful for checking wiring and operation of shift lights for example. The
Analogue Input test is very useful when checking sensor wiring.
To run one of the tests select the appropriate test from the Online menu.