28 configuration – MoTeC ESDL3 User Manual

Page 32

Advertising
background image

28 Configuration

The Race display is normally used to display minimal information, e.g.
RPM, Lap Time, Fuel Remaining or Laps Remaining.
The bottom alpha/numeric display can be used to display additional
information as needed.

Practice Mode

The Practice display is used to display basic information, plus information
to help the driver improve lap times, e.g. Lap Time, Lap Gain/Loss,
Maximum Straight Speed, Minimum Corner Speed or Corner Exit Speed.
The bottom alpha/numeric display may be used to display additional
information as needed.

Warm-up Mode

The Warm-up display is used to display important engine sensor readings
during engine warm-up, e.g. RPM, Battery Voltage, Engine Temperature,
Oil Pressure, Oil Temperature and Fuel Pressure.
The bottom alpha/numeric display can be used to check many other warm-
up values.

Advertising
This manual is related to the following products: