MoTeC ESDL3 - Manual (Page 5)

MoTeC Introduction 1
Introduction
SDL3 - Sport Dash Logger
The SDL3 is a combined sophisticated display and powerful control device in
one lightweight unit. With the addition of a Data Logging upgrade it becomes
a fully programmable data logger with 16 MB or 120 MB memory (see Dash
Logger Upgrades). The screen layout is fully configurable to display a
multitude of data channels, warning alarms, lap times, fuel calculations,
minimum corner speeds, maximum straight speeds and more. The SDL3
performs calculations, acquiring data from other MoTeC devices such as an
ECU, other Dash Logger and input expander modules, which enable it to log a
multitude of inputs.
ESDL3 - Enclosed Sport Dash Logger
The ESDL3 is an enclosed version of the SDL3, providing the flexibility to
connect a display suitable for your application or to use as a 'black box' type
data logger. It functions in the same way and uses the same software as the
SDL3.
In the remainder of this documentation when reference is made to the SDL3
Dash Logger, it also applies to the ESDL3 – except when referring to the
display.
Features
All MoTeC Dash Loggers come with a range of features as standard and
several options available as upgrades to customise and grow your system.
These additional features are activated through a simple password system,
and can be purchased at any time when you need them.
See Dash Logger Upgrades
General
• All-in-one display, logger and controller eliminates the need for separate
devices
• Suitable for bikes, cars, marine and industrial applications
• Compact, durable and reliable unit
• Supports wideband Lambda from PLMs or LTCs, using Bosch LSU or
NTK UEGO 5 wire sensors
• Straightforward control for lights, fans, pumps
• Easily integrated with MoTeC CAN based devices e.g. expanders, lap
timing devices, shift lights and ECUs