Multitrack recorders, Assigning signals to the ygdai outputs – ALESIS 03D User Manual

Page 234

Advertising
background image

224

Chapter 18—Digital I/O

03D—Owner’s Manual

Multitrack Recorders

The 03D’s YGDAI slot provides eight digital inputs and outputs, and can be used to
connect modular digital multitrack recorders, such as the Alesis ADAT or Tascam
DA-88. The digital outputs can be any combination of bus outs, aux sends, and direct
outputs from the first 16 input channels. So even though the 03D has only four bus out-
puts, up to eight tracks can be recorded simultaneously. When the 03D is used with a
digital multitrack recorder, input channels 17 to 24 function as tape returns.

Assigning Signals to the YGDAI Outputs

The following table shows which signal sources can be assigned to the eight YGDAI dig-
ital outputs. Note that these signals are not sourced directly from the 03D buses. They
are sourced from the actual outputs before D/A conversion. So they are affected, for
example, by the stereo, bus, and aux send master faders, EQ, and dynamics processors.

1. Use the [DIO] button to locate the D.out Setup page shown below.

2. Use the cursor buttons to select the YGDAI OUTPUT ASSIGN switches,

and the [ENTER] button to set them.
If you are using a mouse, simply click the switches.

The YGDAI card graphic at the top left of the D.out Setup page indicates the type of
YGDAI card installed. The following table lists the available card types.

As an example, this is what the YGDAI card graphic displays when
a CD8-AT ADAT card is installed.

Output

Source

1

BUS 1, AUX 1, Direct Out 1, Direct Out 9, or STEREO L

2

BUS 2, AUX 2, Direct Out 2, Direct Out 10, or STEREO R

3

BUS 3, AUX 3, Direct Out 3, Direct Out 11, or STEREO L

4

BUS 4, AUX 4, Direct Out 4, Direct Out 12, or STEREO R

5

BUS 1, AUX 1, Direct Out 5, Direct Out 13, or STEREO L

6

BUS 2, AUX 2, Direct Out 6, Direct Out 14, or STEREO R

7

BUS 3, AUX 3, Direct Out 7, Direct Out 15, or STEREO L

8

BUS 4, AUX 4, Direct Out 8, Direct Out 16, or STEREO R

Indicator

Card

Description

No Connection

No card installed

adat

CD8-AT

ADAT Digital I/O

TASCAM

CD8-TDII

Tascam TDIF-1 Digital I/O

AES/EBU

CD8-AE-S

AES/EBU Digital I/O

YAMAHA

CD8-Y

Yamaha Digital I/O

CASCADE

CD8-CS KIT

Digital Cascade Kit

Advertising