ALESIS 03D - Manual (Page 260)

250
Chapter 19—MIDI
03D—Owner’s Manual
User Define Page
The following table lists the 03D controls that can be used to control user-defined
parameters.
1. Use the [MIDI REMOTE] button to locate the User Def. page.
On the User Define page, you define the MIDI commands to be sent when the 03D’s
faders or [ON] buttons are operated. Two commands can be defined for the [ON] but-
tons. One for the transition from OFF to ON, and one for ON to OFF.
The following values can be set.
Hex: 00–EF, F0, F1, F2, F3, F6, F7, F8, FA, FB, FC, FF
FAD: Outputs the fader value (00–7F)
END: Completes the command
03D Control Parameter
Channel faders Output a user-defined command (31 byte)
[ON] buttons (OFF to ON) Output a user-defined command (16 byte)
[ON] buttons (ON to OFF) Output a user-defined command (16 byte)