eLine Technology ANPTZ-70-10DN - Manual (Page 14)

9
Installation
English
4. INSTALLATION
4.1 INSTALLATION WARNINGS
Make sure to install the camera in a location that can support
the camera weight.
Make sure there are no live electrical cables in the area
where you plan to mount the camera.
• Camera rated for outdoor use and is weatherproof only when using
the included wall mount or accessory ceiling mount. The PTZ
camera is not intended for submersion in water.
• Mount the camera where the lens is away from direct and intense
sunlight.
• Plan your cable wiring so that it does not interfere with power lines
or telephone lines.
• Ensure that the camera wiring is not exposed or easily cut.
• Mount the camera in an area that is visible but out of reach.
4.2 WALL MOUNT INSTALLATION (INDOOR/
OUTDOOR)
To install the camera:
1. If necessary, change the camera’s ID and protocol information. See
“Changing Protocol Information” on page 5.
2. Use the back of the wall mount to mark holes for the wall mount
screws and cable and drill the holes.
3. Connect the cables (see “Connecting the Camera” on page 2).
eLineTechnology.com