eLine Technology ANPTZ-70-10DN - Manual (Page 27)

21
Using the OSD Menu
En
gl
is
h
• F OCUS MODE [AUTO/MANUAL/SEMIAUTO]: Sets camera focus
mode. If set to SEMIAUTO, manual focus is used in preset operation,
and Auto focus is used when manually controlling the camera. Focus
information is saved when the preset is saved.
• DIGITAL ZOOM [ON/OFF]: Sets digital zoom function to ON/OFF. If
this is set to OFF, zoom function stops at the optical zoom
magnification limit
• LINE LOCK [ON/OFF]: Not applicable.
• IMAGE FLIP [ON/OFF]: Flips image horizontally and vertically when
set to ON.
White Balance Setup
White Balance mode is set to AUTO, and cannot be changed.
22
Using the OSD Menu
Auto Exposure Setup
• BACKLIGHT [ON/OFF]: Turns Backlight Compensation ON/OFF.
• DAY/NIGHT [AUTO1/AUTO2/DAY/NIGHT]: Select Day/Night mode.
DAY is for a color image, and NIGHT is black and white. AUTO1/AUTO2
change between day and night mode based on luminance level of the
scene. AUTO1 changes between Day/Night mode faster than AUTO2.
• BRIGHTNESS [0~100]: Adjusts brightness of images. Iris, Shutter
Speed, and Gain are adjusted automatically in correspondence with
Brightness value.
• IRIS [AUTO]: AUTO is the default setting; it cannot be changed.
• SHUTTER SPEED [ESC/A. Flicker/Manual(x128~1/120000 sec )]:
ESC is the default setting; it cannot be changed.
• AGC [OFF/NORMAL/HIGH]: Enhances image brightness
automatically if luminance level of image signal is too low.
• SSNR [OFF/LOW/MIDDLE/HIGH]: Enhances images by reducing
noise when gain level is too high.
• SENS-UP [AUTO(2~128)/OFF]: Enables/disables Slow Shutter
function when luminance of image (signal) is too dark. When set to
AUTO, you can set the limit for the Slow Shutter function.
eLineTechnology.com