EXP Computer ThinFax LXM - Manual (Page 16)

Log
# Press MENU, U, L to display the Log screen.
Switching Operation in Log
# # Press Arrow up or Arrow down key to move the highlighted bar to select a
record.
# # Press F4 to View a fax file. (Received Fax only)
#
# Press F5 to Delete a highlighted record.
#
# Press F6 to Delete All records in the log.
#
# Press F8 to Resend a highlighted file.
# Press F9 to Print a highlighted file.
Fax Log Entry
# Send/Receive: Indicates the type of activity in the log file.
# Status: Indicates the following Fax indication:
OK Fax operation complete.
Abort User has aborted the fax operation.
Error Fax operation encounters error(s).
Busy The remote fax is busy.
NoAns The remote fax is not answering the call.
# Date and Time: Date and time stamp when starting the fax operation.
# Pages: Number of page(s) sent or received.
# To/From: Name of the fax recipient or sender.
Configuring MiniFax
The configuration menu allows you to do the following operations: registers your name,
local Fax number, changes modem characteristics (via Init String field), or for the credit
card caller you can add ID number (via Dial Prefix field), Modem speaker control,
Pulse and Manual dial selection.
# Press MENU, U, C to display the Configuration screen.
To configure the MiniFax
1. Fill in the Name: and Fax#: of the MiniFax user.
2. Select the Modem speaker: Set the modem's sound ON or OFF .
3. Init String: This entry is for advance users who need to change modem's
operation parameter(s). For example, to set the CTS/RTS flow control and
sensing the Carrier Detect (CD) the entry in this field would be 'AT\Q3&C1'. To
disable the Dial tone detection this entry would be 'ATX3'. (You may need this
feature when the dial tone pitch is different from North American dial tone.)
Normally you should leave this entry blank.
4. Dial prefix: This field is for users who need to add prefix number to the
telephone number. For example, to access the outside line from a hotel and in
some areas user need to dial 1 before an Area Code: This entry would be 8,1
5. Dial pulse: If you are using pulse (rotary) phone line, check this box to enable
pulse dialing. Leave the box unchecked if you use touch-tone line.