EXP Computer ThinFax LXM - Manual (Page 9)

The initial screen after running MiniFax will be:
The screen will then change to the Send Menu after several seconds, or you may press
any key to access the Send screen immediately.
Send fax with Cover Page
1. Connect the modem to a working telephone line.
2. At the sending screen fill in To: fax’s recipient, Fax#: remote fax’s telephone
3. File name: Enter the file name that you wish to send. (Leave blank if you
wish to send a cover page only) You may highlight Files… and press
ENTER or press F7 to display the Files screen and select a file. If you
choose the MEMO
=s file, it can be in either Memo=s format or ASCII format.
For all others built-in applications the file must be saved in ASCII format
only. The File Type: ASCII
=s button is filled in.
4. Make sure that the X is in the box "With cover page." If not, Press TAB to
move the highlight to it, use Space bar or press ENTER to toggle it.
5. To edit a Cover page, press TAB to highlight the Cover Page box and press
ENTER, or press F6.
6. Fill in; Company: of the fax recipient (if any), From: Your name goes in
here, Fax# for your local fax number. You may add the reference subject to
the Re: field and any additional notes to the Comment: field. The comments
field is limited to approximately 16 lines or 500 characters.
7. Press TAB to move the highlight to OK and press ENTER, or Alt + O to
accept the information entered. To discard all the information press to move
the highlight to Cancel and press ENTER , or Alt + C. In both cases,
MiniFax will return to Send screen.
8. To start sending fax, at the Send screen press TAB to move the highlight to
Send fax and press ENTER, or Alt + S or press F8.
9. In the Send fax screen, the Status: field display current MiniFax's operation
such as:
Converting cover page... => initialize COM port =>... Dialing.