EXP Computer ThinFax LXM - Manual (Page 17)

6. Manual Dial: If checked, the user will be prompted at the send fax screen.
Status: Hit Enter after fax tone.
At This point user needs to pick up the handset and dial the number. After hearing the
fax's high pitch tone, press ENTER, to start the fax sending, then place your handset on
its cradle.
Note: For Manual Dial operation user will need the one line to two line (Not Included)
or the 'Y' connector (Male-Female-Female.) in order to connect both the modem
and telephone set to the same telephone line.
7. Highlight the OK button and press ENTER, or ALT + O to accept the information
entered.
Highlighted button and press Cancel, or ALT + C to discard the information
entered.
In both cases, you will be returned to the Utility screen.
About
# # To display information about the MiniFax programs itself such as revision, and
copyright information.
Upgrade the MiniFax
From time to time EXP will release a maintenance upgrade MiniFax for additional
features. The new revision file will be posted on our
BBS (516) 496-3753. The file name convention are:
For ThinFax 1414-LX
Basic-XX.exe. where XX (e.g., 01)= revision number.
For ThinFax 1414-LXM
LXM-XX.exe. where XX (e.g., 01)= revision number.
Your current revision number is displayed on the top of MiniFax's screens. As an
owner of EXP's modem product you are invited to log-on our BBS and check for any
new revision.
See APPENDIX B for detail on how to download and install the upgrade file from the
BBS.