EXP Computer ThinFax LXM - Manual (Page 10)

10. The MiniFax will attempt to make a connection with the remote fax machine,
the progress graph starts incrementing until it reaches 100%.
If there is any error, please consult APPENDIX C for more detail and possible cause of
the error.
Receiving a Fax
Connect the ThinFax modem to a working telephone line and then to start
MiniFax, After MiniFax is started, press MENU, F, R or F3 from any of the
other MiniFax menu to display the following screen
1. Observe the Operation: (Command sending to the modem) and Response:
(modem answering to MiniFax commands) during the initial setting of the
ThinFax 1414-LX/LXM. The ThinFax should always respond with OK.
2. At the end of setting up the ThinFax for fax reception, the status will display
'Waiting For call...' You are now ready to receive a fax.
3. The receiving fax will be stored at C:\_DAT (Default path), to change the path
user must use the MiniFax =s Configuration utility.
To access the Configuration screen press MENU, U, C.
Change the
>>Recv path:== field to your choice. Including the FLASH drive if you
have the ThinFax 1414-LXM card. (i.g. F:\faxrecv)
Receiving fax =s file name format consists of the current month, date, hour and minute
setting in the palmtop.
02220937.mfx (mmddhhmm)