Burkert Type TAT002 - Manual (Page 7)

0911 - 5
english
LED Mode Meaning
on Output 1 active
on Output 2 active
LED1 blinks Programming level (blinks together with LED2)
LED2 blinks Programming level (blinks together with LED1)
E.S. on
Energy-saving mode (second set-value) has
been activated by the digital input
Alarm
LED on
- Signals an Alarm state
- If you are in the lower programming level
"Pr2", which can only be accessed using
a password, the lighting up of the Alarm LED
signals that the displayed parameters can
also be accessed in the first level "Pr1"
(without password).
LED MESSAGES
BUTTON COMBINATIONS
Locking and unlocking the keypad
SET1+ Selecting the programming level
SET1+ Return to the room temperature display
+
DISPLAYING THE SET VALUE
Briefly press the SET button once. The set-value
display appears in the display.
Briefly press the SET button again, or wait 5
seconds in order to display the room temperature.
SWITCH DEVICE ON/OFF
Hold down the SET1 button for at least 4 seconds
(only for parameter OnF = yes).