Burkert Type 1094 - Manual (Page 17)

1094_400 - 15
english
6.2 Switching On / Off and Battery Powered Operation
The hand held terminal can only be switched off in battery powered operation
by pressing the
key.
In use with a control electronics this leads only resets the hand held terminal.
ENTER
Switching On
Switching Off
Battery Powered Operation
The hand held terminal is powered by the control electronics. Batteries are
necessary if the hand held terminal is used as an independent flow meter.
The hand held terminal is automatically switched on when connected to a
control electronics. After switching on the software version is displayed and
the operating mode can be selected. The default mode will be the last user
mode.
V4.1 Operator?
INIT Flow Meter
In battery powered operation the hand held terminal is switched on by pressing
the
key for approx. 2 seconds.
ENTER