Burkert Type 8623 - Manual (Page 20)

18 - 8623
english
Setting the post-comma value of the lower limit value
Increase of the post-comma value
Continue from
7.3.6.2
7.3.6.2 Upper limit value
Î Limit the upper control range using the upper limit value
Setting the pre-comma value of the upper limit value
NOTE: With external set-values (standard signals) the error message
E.06 appears as soon as a signal larger than 20 mA is read in.
Increase of the pre-comma value
Proceed to set the post-comma
value
Setting the post-comma value of the upper limit value
Increase of the post-comma value
Continue from 7.3.8