English, 2 programming mode (the grey values blink) – Burkert Type 8623 User Manual
Page 27
Advertising
8623 - 25
english
8.2
Programming mode (the grey values blink)
Set the multiplier of K
Factor 1
Setting the figures before
the decimal point for K
Factor 1
Setting the figures after the
decimal point for K Factor 1
Selecting the default set-
value
Setting the multiplier or
the unit, if present
Setting up all the following parameters
Setting the figures before
the decimal point for the
corresponding parameter
Setting the figures after
the decimal point for the
corresponding parameter
Return to standard mode
Fig. 16 Programming mode
Advertising