Burkert Type 8623 - Manual (Page 23)

8623 - 21
english
Setting the post-comma value of the amplification factor
Increase of the post-comma value
Continue from 7.3.9
7.3.9 Integral action time TN
Î For the integral action time TN, select a value between 0.1 and 199.99 sec.
Setting the pre-comma value of the integral action time TN
Increase of the pre-comma value
Proceed to set the post-comma
value
Setting the post-comma value of the integral action time TN
End of the programming mode
Change to standard
mode
After setting the integral action time TN, the parameters are accepted
and the return to the standard mode takes place.