Burkert Type S020 - Manual (Page 3)

3
 TableofContents
Type S020
1. About these operAting instructions .................................5
1.1. symbols used .......................................................................................5
2. intended use ................................................................................................6
3. bAsic sAfety informAtion ...............................................................6
4. generAl informAtion ...........................................................................7
4.1. manufacturer's address and international contacts .........7
4.2. Warranty conditions ...........................................................................7
4.3. information on the internet ............................................................7
5. description ...................................................................................................8
5.1. Area of application .............................................................................8
6. technicAl dAtA ...........................................................................................8
6.1. conditions of use ................................................................................8
6.2. Available certificates .........................................................................8
6.3. general technical data .....................................................................9
6.3.1. Diameters available ............................................................... 9
6.3.2. Materials .................................................................................. 9
6.3.3. Dimensions of T fittings .....................................................10
6.3.4. Dimensions of spigots ........................................................17
6.3.5. Dimensions of the saddles ................................................19
6.3.6. Dimensions of the measurement chamber ....................19
6.4. K factors ................................................................................................20
6.4.1. Terms of reference ..............................................................20
6.4.2. Calculation of K factors (in pulse/litre) for
saddles, fusion spigots, welding sockets with
radius or screw-ons ............................................................20
6.4.3. K factors (in pulse/litre) for T fittings used with
a 8041 or 8045 with a G2'' nut .......................................21
6.4.4. K factors (in pulse/litre) for T fittings and wel-
ding sockets used with a 8041 or a 8045 with
clamp connection ................................................................23
6.4.5. K factors (in pulse/litre) for T fittings used with
a 8020, 8024, 8025 or 8026 ..........................................23
6.4.6. K factors (in pulse/litre) for saddles ................................25
6.4.7. K factors (in pulse/l) of the fusion spigots and
welding sockets with radius for measuring
devices with a G2'' nut .......................................................26
6.4.8. K factors (in pulse/litre) for screw-ons ...........................28
7. instAllAtion And commissioning ...........................................29
7.1. safety instructions...........................................................................29
7.2. installation onto the pipe .............................................................30
7.2.1. Recommandations for installing the S020 fitting
on the pipe ............................................................................30
7.2.2. Installing a T fitting ..............................................................32
English