Ampro Corporation XTX 820 - Manual (Page 103)

XTX 820 Reference Manual 97
Appendix C Connector Part Numbers
The connector listed in Table C-1 is used for the onboard SDVO (Serial Digital Video Output)
connector, located on the bottom of the board. The manufacturer's part number can be used to
determine the mating connector when making your own cables.
Table C-1. Connector and Manufacture’s Part Numbers
Connector Pin Number/Pin Spacing/
Orientation Manufacturer Manufacturer’s PN
J6 – SDVO 40-pin, 0.5 mm, Right Angle Hirose FH12-40S-0.5SH (55)
The following list provides the Manufacturer abbreviation used in this table and the web site where you
can locate the required mating connector information.
Hirose = Hirose Electric Co. Ltd @ http://www.hirose-connectors.com