Ampro Corporation XTX 820 - Manual (Page 69)

Chapter 4 BIOS Setup Utility
XTX 820 Reference Manual 63
BIOS Menus
BIOS Main Setup Screen
Main Advanced Boot Security Power Exit
BIOS Setup Utility
BIOS ID P915Rxxx
OEM Version xxxxxx
:
: S0
Processor Intel(R) Pentium(R) M processor 1.4 GHz
CPU Frequency 1399MHz
:
:
System Memory 1016MB
Board Information
Product Revision
xx
Serial Number xxxxx
BC Firmware Rev xxx
Boot Counter xxx
Running Time xxxx
:
:
:
:
:
:
Use [ENTER], [TAB]
or [SHIFT-TAB] to
select a field.
Select Screen
Select Item
+ - Change field
Tab Select Field
F1 General Help
F10 Save and Exit
ESC Exit
V02.xx (C) Copyright 1985-2004, American Megatrends, Inc.
System Time [15:21:33]
System Date
[Fri 09/08/2006]
Figure 4-1. BIOS Main Setup Screen
System Time and Date
• System Time (hh:mm:ss) – This is a 24-hour clock setting in hours, minutes, and seconds
• System Date (day of week, mm:dd:yyyy) – This field requires the alpha-numeric entry of the day
of the week, calendar month, day of the month, and all 4 digits of the year, indicating the century
plus year (Fri 09/08/2006). The day of the week changes with the other settings.
The balance of this screen provides the characteristics or parameters of the XTX 820 module
installed on the XTX baseboard. These characteristics or parameters on screen can not be changed.
NOTE The CMOS Default values are shown highlighted as bold text.
Refer to the right of the BIOS screens for the navigation instructions when
making selections.
Table 4-2. Exiting and Loading Default Keys
Key Description
<ESC> Discard Changes without leaving BIOS Setup Utility
F7 Discard Changes and Exit
F9 Load CMOS default settings.
F10 Save Changes and Exit BIOS Setup Utility