Ampro Corporation XTX 820 - Manual (Page 87)

Chapter 4 BIOS Setup Utility
XTX 820 Reference Manual 81
BIOS Boot Setup Screen
Main Advanced Boot Security Power Exit
BIOS Setup Utility
Boot Device Priority
V02.xx (C) Copyright 1985-2004, American Megatrends, Inc.
Boot Settings Configuration
Quick Boot [Enabled]
Quiet Boot [Disabled]
AddOn ROM Display Mode [Force BIOS]
Automatic Boot List Retry [Disabled]
Halt On Error [Disabled]
The type based boot
priority list allows
to select device types
even if a respective
device is not (yet)
present.
1st Boot Device [USB Floppy]
2nd Boot Device [USB Removable Devi]
3rd Boot Device [USB Harddisk]
4th Boot Device [Onboard LAN]
5th Boot Device [Primary Master]
6th Boot Device [Primary Slave]
7th Boot Device [Secondary Master]
8th Boot Device [Secondary Slave]
Boot Priority Selection [Type Base]
devices.
The device based boot
priority list allows
to select from a list
of currently detected
Select Screen
Select Item
+ - Change Option
F1 General Help
F10 Save and Exit
ESC Exit
Figure 4-3. BIOS Boot Setup Screen
Boot Priority Selection – [Device Based] or [Type Based]
Use these fields to set the boot priority, which determines the sequence the BIOS uses when checking for
a boot device.
∗ If [Device Based] boot priority is selected, you can select from the list of currently detected
devices. The BIOS auto detects any devices that may be connected to the XTX 820 and
baseboard assembly, and will list the devices found including the Mfg and model.
∗ If [Type Based] boot priority is selected, you can select device types from a device list even if the
respective device is not connected yet.
Boot Device Priority
Use these fields to set the boot priority, which determines the sequence the BIOS checks for a
boot device. A BEV (Boot Entry Vector) device (Network or SCSI option-ROMs) can be used to
boot the system.
♦ 1 st Boot Device – [Disabled], [Primary Master], [Primary Slave], [Secondary Master],
[Secondary Slave], [Legacy Floppy], [USB Floppy], [USB Harddisk], [USB CDROM],
[USB Removable Device], [Onboard LAN], [External LAN], [PCI Mass Storage],
[PCI SCSI Card], [Any PCI BEV Device], [Third Master], or [Third Slave]
♦ 2 nd Boot Device – [Disabled], [Primary Master], [Primary Slave], [Secondary Master],
[Secondary Slave], [Legacy Floppy], [USB Floppy], [USB Harddisk], [USB CDROM],
[USB Removable Device], [Onboard LAN], [External LAN], [PCI Mass Storage],
[PCI SCSI Card], [Any PCI BEV Device], [Third Master], or [Third Slave]
♦ 3 rd Boot Device – [Disabled], [Primary Master], [Primary Slave], [Secondary Master],
[Secondary Slave], [Legacy Floppy], [USB Floppy], [USB Harddisk], [USB CDROM],
[USB Removable Device], [Onboard LAN], [External LAN], [PCI Mass Storage],
[PCI SCSI Card], [Any PCI BEV Device], [Third Master], or [Third Slave]