Ampro Corporation XTX 820 - Manual (Page 94)

Chapter 4 BIOS Setup Utility
88 Reference Manual XTX 820
BIOS Exit Setup Screen
Main Advanced Boot Security Power Exit
BIOS Setup Utility
Exit Options
Select Screen
Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
V02.xx (C) Copyright 1985-2004, American Megatrends, Inc.
Save Changes and Exit
Discard Changes and Exit
Discard Changes
Load CMOS Defaults
Exit System Setup
after saving the
changes.
F10 key can be used
for this operation
Figure 4-6. BIOS Exit Setup Screen
Exit Options
• Save Changes and Exit
This selection allows you to leave Setup, saving your changes, and rebooting the system so the
new BIOS Setup configuration parameters can take effect.
• Select Save Changes and Exit from the Exit Options menu and press <Enter>.
The following text appears on screen:
Save Configuration Changes and Exit Now?
[Ok][Cancel]
• Select Ok to save changes and exit.
The < F10 > key can also be used for this operation.
• Discard Changes and Exit
This selection allows you to quit Setup without making any permanent changes to the BIOS
Setup system configuration.
• Select Discard Changes and Exit from the Exit Options menu and press <Enter>.
The following text appears on screen:
Discard Changes and Exit Setup Now?
[Ok][Cancel]
• Select Ok to discard changes and exit.
The < ESC > key can also be used for this operation.