Fluid Components International FS10A - Manual (Page 34)

FS10 Series
32 Fluid Components International LLC
6 MAINTENANCE AND TROUBLESHOOTING
Maintenance
ypically required for the sensing element. If the process media sticks to the process pipes (or tank) the sensing element should be cleaned in
the same manner and frequency as the process pipe (or tank). Occasionally check for moisture in the control circuit housing and wiring con-
nections. Check for proper functionality and response time.
Troubleshooting
If the instrument is not operating, go through the installation and adjustment procedures and verify proper installation. If the instrument
fails after some time in service and it has been checked, or if it fails to operate at start up and the installation has been verified, contact your
authorized FCI service representative.
If FCI representative cannot be reached, contact FCI Technical Service. If the instrument is to be returned, obtain a Return Authorization. The
form contains a declaration of decontamination cleaning information that the instrument must comply with before it is shipped to FCI. The
telephone number in the US is 1-800-854-1993 or 1-760-744-6950 or email: [email protected]