Fluid Components International FS10A - Manual (Page 36)

FS10 Series
34 Fluid Components International LLC
Flow/Liquid Level/Temperature Instrumentation
Visit FCI on the Worldwide Web: www.fluidcomponents.com
1755 La Costa Meadows Drive, San Marcos, California 92078 USA 760-744-6950 Π800-854-1993 Π760-736-6250
European Office: Persephonestraat 3-01 5047 TT Tilburg РThe Netherlands РPhone 31-13-5159989 ΠFax 31-13-5799036
Doc no. 23EN000021A
EC DECLARATION OF CONFORMITY Model FS10
We, Fluid Components International LLC, located at 1755 La Costa Meadows Drive, San Marcos, California
92078-5115 USA, declare under our sole responsibility that the FS10 Flow Switch Flow Monitor Product
Family, to which this declaration relates, are in conformity with the following standards and Directives.
Directive 94/9/EC ATEX
IECEX Scheme
Certified by KEMA Quality B.V. (0344): Utrechweg 310, 6812 AR, Arnhem, The Netherlands
EC-Type Examination Certificates:
KEMA 10ATEX0142X satisfies EN 60079-0:2009, EN 60079-15:2005, EN 60079-31:2009 requirements for
use in hazardous areas.
IECEx KEM 10.0067X satisfies IEC 60079-0:2007-10, IEC 60079-15:2005-03, IEC 60079-31:2008
requirements for use in hazardous areas.
Hazardous Areas Approval KEMA 10ATEX0142X and IECEx KEM 10.0067X for:
II 3 G Ex nA IIC T4 Gc
II 3 D Ex tc IIIC T81°C Dc
Directive 2004/108/EC EMC
Immunity specification: EN 61000-6-2: 2005
Emissions specification: EN 61000-6-4: 2007
Directive 97/23/EC Pressure Equipment
The FS10 Model does not have a pressure bearing housing and is therefore not considered as pressure
equipment by itself according to article 1, section 2.1. The Model FS10 is in conformity with the sound
engineering practices as defined in the Pressure Equipment Directive (PED) 97/23/EC article 3, paragraph 3.
Issued at San Marcos, California USA
September 2011
______________________________________
Eric Wible, Engineering Manager
Eric Wible
2011.09.20
11:53:50 -07'00'
APPENDIX A APPROVALS