Hydrotech Classic Series Stenner Basic Service Manual - Manual (Page 16)

15
Determine cause of tube failure before installing new tube
• Natural wear, end of service life.
• Blockage, excessive pressure, worn/damaged parts:
locate and correct problem.
Tube Fundamentals
For maximum tube life
IMPORTANT!
Key for optimum performance
Remember to check tube psi rating against
application psi. All tubes (1, 2, 3, 4, 5 & 7) are
rated to 0-25 psi; 1, 2 & 7 are rated to 26-100 psi.
Continued...