Hydrotech Classic Series Stenner Basic Service Manual - Manual (Page 36)

35
14. To secure mounting plate, align its arrow with the FRC
housing arrow and install the three screws.
NOTE Additional information
The dial ring will be stiff or difficult to rotate if it
lacks lubrication (AquaShield
® ) or the screws are
over tightened. If the screws are too loose, the dial
ring can inadvertently be turned to 10 by the motor.
IMPORTANT!
Key for optimum performance
If the dial ring does not
rotate from L to 10, the
FRC mounting plate is in
the wrong orientation.