Hydrotech Classic Series Stenner Basic Service Manual - Manual (Page 3)

2
Hazardous Pressure/Chemical Exposure
To reduce risk of chemical exposure, the use of proper
personal protective equipment is mandatory when
working on or near chemical metering pumps.
Shut off water source. Use caution and bleed off all
resident system pressure prior to attempting service
or installation.
Use caution when disconnecting discharge tubing
from pump. Discharge tubing may be under pressure
and may contain chemical.
Please refer to Stenner Installation and Maintenance
Manual for safety hazards and notices. NOTICE:
BEST PRACTICE
Factory recommended
NOTE
Additional information
IMPORTANT!
Key for optimum performance
Important icons used in this manual
Section I General Information
Safety Precautions
Before Working on a Stenner Chemical Feed Pump