Clear-Com FreeSpeak Beltpack - Manual (Page 28)

Clear-Com Communication Systems
Eclipse Wireless Communication System
1 - 1 0
ACCESSING THE TALK/LISTEN PATHS ON
THE ECLIPSE BELTPACK
You can access up to twelve communications routes with a beltpack.
You activate a route by pressing the appropriate talk button (A or B)
when the desired label appears on the beltpack’s display.
• Page 1 of the beltpack’s display screen shows the assignments for
the Talk A and Talk B buttons (2 assignments).
• Page two shows the next set of assignments for the Talk A and
Talk B buttons (2 assignments).
• Page three shows the next set of assignments for the Talk A and
Talk B knobs (2 assignments).
• Page four shows the next set of assignments for the Talk A and
Talk B knobs (2 assignments).
• Page five shows the next set of assignments for the Talk A and
Talk B knobs (2 assignments).
• Page six shows the next set of assignments for the Talk A and Talk
B knobs (2 assignments).
Figure 1-8 shows how the front-panel screen on a beltpack displays
its six communications routes.