Clear-Com FreeSpeak Beltpack - Manual (Page 52)

Clear-Com Communication Systems
Eclipse Wireless Communication System
2 - 1 8
Figure 2-3: Connection Information Display
From these displays, press button C to return to the status menu.
Table 2-1: Connection Information
Item Description
1 Radio Fixed Part Identifier. This title refers to the whole of
the second line of text. The RFP is the Radio Fixed Part to
which the Beltpack is currently connected. (Much of this line
of text is not unique to one Active Antenna.)
2
This is the PARK (Primary Access Rights Key) number
(reserved for future use.)
3
The abbreviation stands for Equipment Installer Code and
the number on the second line is the EIC number.
4
Fixed Part Number. This and item 6 below are unique to the
particular Active Antenna.
5
Fixed Part Sub-Number. This is effectively the system
number which identifies which matrix the Beltpack is
registered with.
6 Radio Fixed Part Number. This is the identifier of the Active
Antenna on the system.
7 Carrier Number (both Active Antenna and Beltpack)
8
Timeslot Number (used by Active Antenna)
9
Received Signal Strength Indication (digital indication). This
is an arbitrary number in the range 0-52 and, therefore,
significant only in the context of a particular installation.
10
Block error rate for received frames.