Clear-Com FreeSpeak Beltpack - Manual (Page 49)

Clear-Com Communication Systems
Eclipse Wireless Communication System 2 - 1 5
TAP LATCH
The Tap Latch function determines whether the rotary push buttons
latch with one tap or two taps when the beltpack is set in latching
mode.
• Select the Button Options menu from the Programming menu.
• Select the Tap Latch on the Button options menu and use the scroll
keys to toggle between the 1 Tap Latch and 2 Tap Latch states.
• Press button C to set the Tap Latch mode.
PTT CONFIGURATION
PTT configuration allows a PTT switch to be enabled or disabled.
Note: The PTT configuration feature is only available on PD2202
beltpacks.
• To configure PTT set to the Button options menu and use the scroll
keys to select PTT configuration.
• The PTT configuration menu will be displayed. Use the scroll buttons
to enable or disabled the PTT switch.