Dc in power connector, Exp in connector, Exp out connector – Clear-Com FreeSpeak Beltpack User Manual
Page 61: Dc in power connector -7, Exp in connector -7, Exp out connector -7, Ceiver/antennas -7
Clear-Com Communication Systems
Eclipse Wireless Communication System
3 - 7
DC IN Power Connector
This connector is used to locally power the antenna splitter with the
supplied universal power supply. Use of local power is required.
EXP IN Connector
This male DB-15 connector is reserved for future use.
EXP OUT Connector
This female DB-15 connector is reserved for future use.
CONNECTING AN ANTENNA SPLITTER TO THE
ECLIPSE BASE AND TO TRANSCEIVER/ANTENNAS
After the connections have been made between the splitter and the
transceiver/antennas, make sure that the data LED’s are lit at the
individual ports on the antenna splitter. Also make sure that the both
the green power LED and the yellow data LED are lit on each
transceiver/antenna. If all are properly lit, then the connection has
been successfully made and the coverage zones will be active and will
support beltpacks. If the transceiver antennas are not lit, check the
connections.
3
4
5