Clear-Com FreeSpeak Beltpack - Manual (Page 42)

Clear-Com Communication Systems
Eclipse Wireless Communication System
2 - 8
• Turns on - upon first detecting audio to the headset audio.
• Turned off - when receiving the loudspeaker off message from the
matrix. The matrix sends this message when it is no longer
routing audio to the beltpack.
ADJUST CONTRAST
• Select the Adjust Contrast option from the main programming menu
and press button C to display the contrast setup.
• The contrast adjustment slider is displayed.
• Use the scroll buttons to adjust the contrast level and press button C
to set the contrast and exit to the previous menu.
THE ALARM OPTIONS MENU
This is the Alarm menu for determining whether the low battery and/or
low signal strength warnings should sound in the headphone.
You reached this menu by selecting the Alarm option on the main
programming menu.
To return to the main programming menu, select Exit (the Up arrow on
the display) and press pushbutton C.
• The Alarm menu showing the low battery warning option selected.
• Press button C to select the low battery alarm menu and use the
scroll buttons to switch between the low battery alarm settings.