Advantech Data Acquisition Modules ADAM 4000 - Manual (Page 315)

Chapter
8
Chapter 8 Calibration 8-3
4. Execute the Offset Calibration command. This is also done through
the ADAM utility software. (Please see “Offset Calibration” option
in the Calibration sub-menu of the ADAM utility software).
Figure 8-2 Zero Calibration
5. Execute the Span Calibration command. This can be done through
the ADAM utility software. (Please see “Span Calibration” option in
the Calibration sub-menu of the ADAM utility software).
Figure 8-3 Span Calibration