INSTEON Wireless Thermostat with Humidity (2441ZTH) Manual - Manual (Page 15)

Page 15 of 27 Rev: 1/21/2014 8:36 AM
• Group 2 - Heating mode change
• Group 3 - Dehumidifiation, high humidity setpoint
• Group 4 - Humidification, low humidity setpoint
4) Press and hold responder Set button
INSTEON Wireless Thermostat will double-beep upon completion
LED will turn off
Upon entering Add a Scene mode
Upon entering Remove a Scene mode (defaults to Cooling mode)
LCD displays when using Up or Down buttons to select from among the 4 controller groups
User Setup Mode Overview
IMPORTANT! Once you have added INSTEON Wireless Thermostat to INSTEON Thermostat, the
Program and Time/Sensor buttons will no longer perform their initial functions. All program and time
controls will be performed on the INSTEON Thermostat. To access the Program and Time/Sensor
buttons again, you must remove INSTEON Wireless Thermostat from INSTEON Thermostat.
Program and Time/Sensor buttons can be used to wake INSTEON Wireless Thermostat up from its