INSTEON Wireless Thermostat with Humidity (2441ZTH) Manual - Manual (Page 22)

Page 22 of 27 Rev: 1/21/2014 8:36 AM
LED Dual-color, blinks red or green during setup
LED brightness N/A
Local control Yes
Commands supported as controller
On Off
Commands supported as responder N/A
Software configurable Yes
RF range Up to 150-Feet (50m) open air
Phase bridge detect beacon No, RF-only device
INSTEON device category 0x05 (all frequencies)
INSTEON device subcategory
2441ZTH (915 MHz) 0x0A
2732-432 (869 MHz) 0x11
2732-532 (921 MHz) 0x12
X10
X10 address N/A
X10 transmitter N/A
X10 receiver N/A
X10 status response N/A
X10 resume dim N/A
X10 minimum transmit level N/A
X10 minimum receive level N/A
X10 messages repeated N/A
Mechanical
Mounting
Tabletop stand or wall-mount
Wires
N/A
Screw clamp connections Yes, 4 position
Case color White
Set button 1
Plastic UV stabilized ABS
Beeper Yes
Beep on button press Optional (off by default)
LED 1 red/green dual-color
Dimensions 5.7” x 3.6” x 1.3” (14.5cm x 9.1cm x 3.4cm)
Weight 0.53 lbs, 8.4 oz, 240g (without batteries)
Operating environment Indoors
Operating temperature range 4
o
to 40
o
C (39
o
to 104
o
F)
Operating humidity range 0-90% relative humidity
Storage temperature range -20
o
to 70
o
C (-4
o
to 158
o
F)
Electrical