King Technology New Water Models 400/430 - Manual (Page 18)

18
Limited One-Year Warranty
King Technology, Inc. warrants to the original purchaser this
unit will be free from any defects in workmanship and/or
material, for a period of one (1) year from the date of original
purchase. This warranty covers body, cap and control dial, but
specifically excludes o-rings. King Technology at its option may
replace any defective parts or the entire unit without charge
after it is determined what is needed to correct any deficiency.
Replacement parts with the exception of o-rings are warranted
for the remainder of the original warranty.
1. To obtain warranty service, you must deliver the unit to King
Technology or its nearest authorized dealer. Shipping expenses
are the purchaser’s responsibility. The name of the nearest
authorized dealer can be obtained by writing or calling King
Technology at the address and telephone number provided
below. Proof of purchase is required when requesting warranty
service. Purchaser must present the sales receipt or other
documentation verifying proof of purchase.
2. This warranty does not cover defects caused by:
Modification, alteration, repair or service of the unit contrary
to the accompanying instructions; physical abuse to or misuse
of the product or operation or installation in a manner contrary
to the accompanying instructions. This warranty also excludes
all costs arising from the installation, adjustment, removal or
replacement of defective units or parts. This warranty also
excludes any and all claims arising out of the chemicals used
in the product or their characteristics.
3. CAUTION - Read carefully – Failure to follow these
instructions will void the warranty. Do not add shock in or
near skimmer.
A. This unit is not designed for shock treatment of pools.
See your pool dealer or distributor for further information
concerning shock treatments.
B. Control dial settings in excess of the recommended
setting levels for trichlor can result in excess sanitizers being
discharged into the pool. This can result in bleaching or
discoloration of areas around the pool inlet or in some cases
bleaching or discoloration of the entire pool liner or paint.
C. Excess trichlor in the pool can create health hazards to
bathers. Consult each chemical manufacturer’s warnings and
cautions for specifics.
D. Misuse or failure to use the proper chlorine Pac for New
Water® as directed in the instruction manual may cause
damage to equipment or personal injury. This warranty will be
null and void if this unit is not used with the recommended
chlorine Pac or trichlor tablets.
4. This warranty is the exclusive warranty for the New Water®
Cycler. This warranty is not transferable. KING TECHNOLOGY
MAKES NO REPRESENTATION OR WARRANTY OF ANY KIND,
EXPRESS OR IMPLIED, AS TO MERCHANTABILITY, FITNESS
FOR A PARTICULAR PURPOSE OR ANY OTHER MATTER
CONCERNING THE NEW WATER® CYCLER. Any express
warranty not provided herein, and any remedy for breach of
contract but which for this provision might arise by implication
or operation of law is hereby excluded and disclaimed. THE
EXCLUSIVE REMEDY FOR ANY CUSTOMER IS THE REPAIR
OR REPLACEMENT OF THE UNIT, AND THE RECOVERY OF
DAMAGES WILL NOT EXCEED THE PURCHASE PRICE OF THE
UNIT. IN NO EVENT WILL KING TECHNOLOGY BE LIABLE FOR
ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE
DAMAGES FROM ANY CAUSE.
5. Under no circumstance shall King Technology be liable to
purchaser or any other person for any damage or loss incurred
because of any chemicals used in the product or their physical
characteristics, or interruption of service of the product, or
any resulting special, incidental or consequential damages or
losses. Some states do not allow the exclusion or limitation of
incidental consequential damages, so the above limitation or
exclusion may not apply to you.
Manufactured by: King Technology, Inc.
530 11th Ave S, Hopkins, MN 55343 U.S.A.
952-933-6118 • 800-222-0169 • FAX 952-933-2206
www.kingtechnology.com
New Water® is a registered trademark of King Technology, Inc.
Made in U.S.A.
Covered by one or more of the following U. S. Patent Numbers:
4,662,387; 5,076,315; 5,218,983; D540,906; D551,971
and other U.S. and Foreign Patents Pending
20-48-0149E
553031343R5N