King Technology New Water Models 400/430 - Manual (Page 4)

4
15
1/4"
2" MPT/
1 1/2" FPT
7
3/16
"
®
Installation
New Water® Cycler
ABOVE GROUND POOLS
The New Water® Cycler comes in several different
models. Please review this list, determine which
model you have and follow the appropriate installation
instructions for that model only.
Cycler Model #120
In-line for above ground
pools ranging from 5,000
to 25,000 gallons. Uses
a pre-filled chlorine pac,
model 105C. Installation
instructions are on pages 7
and 8. Replacement Cycler Pac
Model 105C for use in the
New Water® Cycler Model
120.
IN GROUND POOLS
Cycler Model #400
In-line for in ground pools
ranging from 5,000 to
40,000 gallons. Uses
a pre-filled chlorine pac,
model 407C. Installation
instructions are on page 9. Replacement Cycler Pac
Model 407C for use in the
New Water® Cycler Models
400 and 430.
Cycler Model #430
Off-line for in ground pools
ranging from 5,000 to
25,000 gallons. Uses
a pre-filled chlorine pac,
model 407C. Installation
instructions are on pages
10 and 11.
IN GROUND - Off-line
Installation Tips
• Do not plumb into copper pipe as corrosion will occur.
• By installing a flow indicating device on the inlet line
you can monitor the gallons per minute.
See manufacturer’s directions for the installation of the
flow indicating device.
Before installing any of these Cyclers, make
sure that:
• You have all the supplies.
• The pump is turned off.
• The plumbing lines are dry.
17"
2" FPT
7"
®
®