King Technology POOL FROG Mineral Hybrid System Digital - Manual (Page 12)

12
Winterizing
Just like the pool plumbing, freezing may damage the system’s cell and flow sensor. If severe or extended periods of freez-
ing temperatures are possible, drain all water from the pump, filter, and supply and return lines before any freezing condi-
tions occur. Remove the cell and store indoors. Then winterize the POOL FROG® Mineral Hybrid Cycler as follows:
1.
3.
4.
2.
5.
Turn pump off and turn dial
to 0.
Remove cap.
Unscrew knob in the back
of POOL FROG® Mineral
Hybrid Cycler. Allow all
water to drain.
Remove the POOL FROG®
Mineral Reservoir and discard
in trash. Even if you hear
spent minerals inside, it is no
longer effective. Replace with
a new POOL FROG® Mineral
Reservoir in the spring.
Lubricate o-ring with the
silicone lubricant that came
with your POOL FROG® Mineral
Hybrid. DO NOT USE
petroleum based lubricants.
Replace the cap loosely.
Before turning the power off
on the POOL FROG® Mineral
Hybrid Generator Control
Panel, press
until WNTR
appears.
Press to select YES. The
Mineral Replacement Indicator
timer will be set to 0.
When the pool is reopened
and the system is turned back
on, NEED MNRL will appear
indicating it is time to replace
the mineral reservoir.
WNTR
WNTR
YES
6.
���� ����
����
�����
�����
�����
�������
���������