KT&C KPT-SPDN120HD - Manual (Page 17)

3. Program and Operation
3.2 Main Menu
▲ / ▼ : move joystick up and down for selecting an item.
◀ / ▶ : move joystick left and right for moving an item.
▶ / [Open] / [Near]: move joystick right to select or save values or go to edit pages.
▶ / [Close] / [Far]: move joystick to cancel or to exit current menu.
(Back to previous menu without saving)
3.3 System Setup Menu
▲ / ▼ : move joystick up and down for selecting an item.
◀ / ▶ : move joystick left and right for moving an item.
▶ / [Open] / [Near]: move joystick right to select or save values or go to edit page.
▶ / [Close] / [Far]: move joystick to cancel or to exit current menu (back).
3.3.1 System Information
The system Information displays model name / Running Version / Protocol / Communication
Type / Camera ID No. / System. It is read only for reference. Use the following steps to display
the System Information screen: Camera ID changes with respect to ID switching setting
- Enter into {Main MENU}
- Select {System} using the joystick [▶].
- Move the joystick right [▶] for selecting {Info} in the sub menu of {System}.
- Press [Far] button or use joystick [▶] to return to previous menu (Back).
17
MAIN MENU
SYSTEM SETUP
DISPLAY SETUP
CAMERA SETUP
DOME MOTION
PRESET SETUP
PATTERN SETUP
TOUR SETUP
SCAN SETUP
ALARM SETUP
EXIT
SYSTEM SETUP
INFO.
REBOOT
INITIALZE
PASSWORD
EXIT
SYSTEM INFORMATION
X12 MINI SPEED DOME
V x.xx.xx
RS485/2400
1080P 30HZ
ID001
-EXIT: (FAR)