KT&C KPT-SPDN120HD - Manual (Page 35)

APPENDIX. Pelco Protocol function List
ESC / Power
LCD Display
Number
Controller
Function Keys
Camera Focus Control
Function Keys
Joystick
> F1(PSET), F2(TOUR), F3(PATT), F4(SCAN)
> NER / FAR, TELE / WIDE
Based on WTX1200A
Function Key Preset No. Operation e.g. 1 e.g. 2
Preset Preset 1~59, 101~253 No.+Preset 1+Preset -
Preset Shortcut
Saving
* Preset 1~59, 101~253 * * -
Run PAN Preset 33 No.+Preset 33+Preset -
Run PAN Zero Preset 34 No.+Preset 34+Preset -
Scan Setup Preset 60 No.+Preset 60+Preset -
Scan Preset / Scan 61~68 No.+Preset 61+Preset 1+Scan
Tour Setup Preset 70 No.+Preset 70+Preset -
Tour Preset / Tour 71~78 No.+Preset 71+Preset 1+Tour
Pattern Setup Preset 80 No.+Preset 80+Preset -
Pattern Preset / Pattern 81~88 No.+Preset 81+Preset 1+Pattern
Menu Key Preset / **Menu 95 No.+Preset 95+Preset **Menu
ESC Key Preset 96 No.+Preset 96+Preset -
D. Zoom (Toggle) Preset 97 No.+Preset 97+Preset -
* Note:
- To save position of the dome, Press desired number of preset and hold [PRESET] key for 2 seconds.
- To go to OSD Main Menu, Press and hold [MENU] key for 2 seconds.
35