KT&C KPT-SPDN120HD - Manual (Page 20)

3. Program and Operation
3.4.2 OSD Setup
You can see only video or some character with video. Each element is able to handle.
OSD setup allows you to program how labels are displayed on the monitor.
Labels are such as Title, Dwell Time, Zoom ratio, Camera ID, Operation Mode and PTZ Angle
Label position can be set where you want to place on the monitor.
- Enter into {Main Menu}
- Select {Display} and move to {Setup} using joystick [▶]
- Use the joystick to move the label up, down, left, and/or right.
- Press [Tele] button to edit the position of labels.
- Move the joystick right [▶] to change the status of labels.
- Other labels can be set with same method.
- Press [Far] button to return the previous menu (OSD setup).
- Press [Open] button or use joystick to save the status.
- Press [Close] button or use joystick to return to previous menu (Back).
3.4.3 Privacy zone
A Private mask zone allows an administrator to program one four-sided, user defined zone which
cannot be viewed by operators. The mask can be changed with pan angle and tilt angle using
joystick and be adjusted in size according to zoom ratio [Tele / Wide]. Maximum 15 positions can
be displayed on the monitor screen. The speed of displaying masks is proportional to the number
of masks on the screen. It is recommended that you set the size to at least twice the size of the
object (height and width)
- Enter into {Main Menu}
- Select Display and Privacy Zone using joystick [▶].
- Move the joystick left or right to select zone ID[00~14].
- To program a Privacy Zone, select Edit Mask, move to a Target (Pan / Tilt) and adjust a Mask
size (Zoom).
- After editing a mask, you can re-size width & height using joystick [▶]. (e.g. ~5X)
- Set display On to display saved mask.
- It is possible to clear saved zone No.xx individually.
- Press [Open] button or use joystick to save settings.
- Press [Close] button or use joystick to return to previous menu (Back).
20
OSD SETUP
LABEL POSITION : OFF
TIME : ON
ZOOM : OFF
ID : ON
MODE : ON
ANGLE : 3SEC
SAVE : OPEN
BACK : CLOSE
- CHANGE : (LEFT/RIGHT)
- TO SETUP : (TELE)
PRIVACY ZONE SETUP
PRIVACY.00 : NOT USED
EDIT :
DISPLAY :
WIDTH :
HEIGHT :
CLEAR
SAVE : OPEN
BACK : CLOSE
-CHANGE : (LEFT/LIGHT)
- TITLE - MODE -
- DTIME -
EROOR MSG
- EXIT : FAR
- ID -
ZOOM - ANGLE -
PRIVACY ZONE SETUP
PRESS MOVE KEY
SAVE : NEAR
EXIT : FAR